Toyota 2005 Tacoma Owner's Manual page 150

05 02.25
Front seat—
2. Front seat without seatback table—
Widen the gap between the seat
cushion and seatback slightly and
confirm the position of the lower an-
chorages near the button on the
seatback.
Front seat with seatback table—Wid-
en the slits of the seat cushion
slightly and confirm the position of
the lower anchorages near the but-
ton on the seat cushion.
3. Type A—Latch the hooks of lower
straps onto the anchorages
tighten the lower straps.
Type B—Latch the buckles onto the
anchorages.
Rear seat—
Type A—Latch the hooks of
straps onto the anchorages and tighten
the lower straps.
Type B—Latch the buckles onto the an-
chorages.
For owners in Canada—The symbol on
a child restraint system indicates the pres-
ence of a lower connector system.
124
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" on page 113 in this Section.)
For installation details, refer to the instruc-
tion manual equipped with each product.
CAUTION
D
When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.
and
D
Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
D
lower
After securing the child restraint
system, never slide or recline the
seat.
D
Do not install a child restraint sys-
tem on the rear seat if it interferes
with the lock mechanism of the
front seats. Otherwise, the child or
front seat occupant(s) may be killed
or seriously injured in case of sud-
den braking or a collision.
2005 TACOMA from Mar. '05 Prod. (OM35862U)