Toyota 2005 Tacoma Owner's Manual page 147

05 02.25
—Installation with child
restraint lower anchorages
(access cab models)
LS13078
Front seat
LS13099
Rear seat
Lower anchorages for the child restraint
systems complying with the FMVSS225
or CMVSS210.2 specifications
installed in the seat.
Front seat without seatback table—
The anchorages are installed in the gap
between the seat cushion and seatback of
the seat as shown in the illustration.
Front seat with seatback table—
The anchorages are installed in the seat
cushion of the seat.
Rear seat—
The anchorages are located at the base
of the seatback as shown in the illustra-
tion.
Child restraint systems complying with the
FMVSS213 or CMVSS213 specification
can be fixed to these anchorages. In this
case, it is not necessary to fix the child
restraint system with a seat belt on the
vehicle.
are
10th lock
position
LS13160a
CHILD RESTRAINT
INSTALLATION
1. Front seat—Fold down the front seat
seatback and back to the 1st lock
position (most upright position) until
it locks into place. Adjust the seat-
back to the 10th lock position.
Make sure the seatback is locked secure-
ly.
2005 TACOMA from Mar. '05 Prod. (OM35862U)
1st lock
position
SYSTEM
121