Toyota 2008 FJ Cruiser Owner's Manual page 277

3-5. Other interior features
After calibration, leave the system for 6 seconds or press the
SET button for about 2 seconds.
If the display returns to the outside temperature display, the calibra-
tion is complete.
n Circling calibration
Stop the vehicle where it is safe to drive in a circle.
When circling calibration fails, Er is displayed for 2 seconds and then COM-
PASS flashes. It also flashes when circling calibration is not completed.
If you want to cancel the calibration before it is complete, press the SET but-
ton for about 2 seconds.
254
Press the SET button
until the zone number
appears on the outside
temperature display.
Push the SET button.
will start moving.
"– –"
Drive the vehicle in a cir-
cle at 5 mph (8 km/h).
If there is not enough space
to drive in a circle, drive
around the block until the
direction is displayed.
When the compass display
returns to the outside tem-
perature display, calibration
is complete.