Indicator And Warning Lights - Yamaha 2008 WR250X Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
To unlock the steering
2
1
1
2
3
1. Push.
4
2. Turn.
Push the key in, and then turn it to
5
"OFF" while still pushing it.
6
7
8
9

Indicator and warning lights

1 2
6 5
1. Coolant temperature warning light "
2. Fuel level warning light " "
3. Neutral indicator light " "
4. Turn signal indicator light "
5. High beam indicator light "
6. Engine trouble warning light "
Turn signal indicator light "
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
Neutral indicator light "
This indicator light comes on when the
transmission is in the neutral position.
4-2
EAU11003
High beam indicator light "
This indicator light comes on when the
3 4
high beam of the headlight is switched
on.
Fuel level warning light " "
This warning light comes on when the
fuel level drops below approximately
2.1 L (0.55 US gal, 0.46 Imp.gal). When
this occurs, refuel as soon as possible.
The electrical circuit of the warning light
"
can be checked by turning the key to
"ON".
If the warning light does not come on
"
for a few seconds, then go off, have a
"
Yamaha dealer check the electrical cir-
"
cuit.
EAU11020
"
Coolant temperature warning light
" "
This warning light comes on if the en-
gine overheats. If this occurs, stop the
engine immediately and allow the en-
EAU11060
"
gine to cool.
The electrical circuit of the warning light
can be checked by turning the key to
EAU11080
"
EAU11350
EAU11442