Table of Contents
Advertisement
2. Push both sides of the cover and set
the cover by hooking the 4 inside pro-
trusions.
Check that the 2 hooks and 4 protrusions
are securely attached.
'02 Rav4_U (L/O 0108)
3. Lock the latch handle which is on the
bottom of the cover.
Check that the cover is securely in place.
2002 MY RAV4_U (OM42503U)
—After changing wheels
10. Check the air pressure of the re-
placed tire.
Adjust the air pressure to the specification
designated on page 257 in Section 8. If
the pressure is lower, drive slowly to the
nearest service station and fill to the cor-
rect pressure.
Do not forget to reinstall the tire inflation
valve cap as dirt and moisture could get
into the valve core and possibly cause air
leakage. If the cap is missing, have a new
one put on as soon as possible.
11. Restow all the tools and jack secure-
ly.
As soon after changing wheels as pos-
sible, tighten the wheel nuts to the torque
specified on page 257 in Section 8 with
a torque wrench. Have a technician repair
the flat tire.
CAUTION
Before driving, make sure all
tools and jack are securely in place
in their storage location to reduce the
possibility of personal injury during a
collision or sudden braking.
the
197
Advertisement
Chapters
Table of Contents
