Honda 1996 Accord Coupe Owner's Manual page 57

Driver's Lumbar Support
On EX model in the U.S., and EX-R
model in Canada
Vary the lumbar support by moving
the lever on the right side of the
seat-back. Pivot the lever forward
until it stops, then let it return. Doing
this several times adjusts the lumbar
support through its full range.
Rear Seat Access
To get into the back seat on the
driver's side, pull up on the seat-back
adjustment lever.
On the EX model with the optional
power seat
Pull up on the release lever on the
side of the seat-back.
Seat Adjustments
To get into the back seat on the
passenger's side, pull up on the
release lever on the side of the seat-
back, and pull the seat-back forward.
The seat-back and seat bottom will
both move forward to allow easier
entry to the back seat. After you
return the seat-back to the upright
position, push the whole seat
backwards until it latches. Make
sure the seat is fully latched before
sitting in it.
Instruments and Controls