Yamaha 2001 V Star XVS650A Owner's Manual page 63

1. Final gear oil drain bolt
2. Final gear oil filler bolt
3. Correct oil level
NOTE:
_
The final gear oil level must be
checked on a cold engine.
Make sure that the motorcycle is
positioned straight
checking the oil level. A slight tilt to
the side can result in a false read-
ing.
_
2. Remove the oil filler bolt, and then
check the oil level in the final gear
case.
PERIODIC MAINTENANCE AND MINOR REPAIR
NOTE:
_
The oil level should be at the brim of
the filler hole.
_
3. If the oil is below the brim of the fill-
er hole, add sufficient oil of the rec-
ommended type to raise it to the
correct level.
To change the final gear oil
1. Place an oil pan under the final
gear case to collect the used oil.
2. Remove the oil filler bolt and drain
bolt to drain the oil from the final
gear case.
3. Install the final gear oil drain bolt,
and then tighten it to the specified
up when
torque.
Tightening torque:
Final gear oil drain bolt:
23 Nm (2.3 m·kg)
4. Add the recommended final gear
oil to the brim of the filler hole.
NOTE:
_
GL4 is a quality rating. Hypoid gear oils
rated GL5 or GL6 may also be used.
_
5. Install and tighten the filler bolt to
6. Check the final gear case for oil
6-12
Recommended final gear oil:
See page 8-2.
Oil quantity:
0.19 L
the specified torque.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kg)
leakage. If oil is leaking, check for
the cause.
6