General Description The LFH 9750 has been designed to offer optimum user convenience and greater efficiency for the daily work. This model is a state-of-the-art digital Dictation/Transcription System for the professional user. Digital transcription allows instant and precise access to any point in the dictation sound file.
Test mode (from Firmware version 2.xx onwards) Switch on the unit by connecting the power supply. To start the Test mode press DOWNLOAD and DELETE buttons and JOG Dial simultaneously. First all pixels on the LCD are switched on for a short time. Simultaneously the Warning tone is audible in the speaker (one peep).
Download the Firmware Upgrade tool with the last version of the relevant Firmware <DPMFirmwareV0103.exe> (e.g. for Firmware version 01.03) and the <Upgrade.txt> file (information about how to upgrade the Firmware of the DPM2 family) from http://www.speech.philips.com/service/ to a dedicated directory on your PC. To upgrade the Firmware on LFH 9750: It is strongly advised to follow the correct sequence given below ! 1.
<DPMFIRMWAREUPGRADE.EXE> file from http://www.speech.philips.com/service/ to a dedicated directory on your PC. To set the MAC Address (after replacement of PCB2): It is strongly advised to follow the correct sequence given below ! 1. Push the Trigger Firmware Upgrade switch on the rear of the machine (through the hole marked with P) by using a small pin whilst simultaneously plugging in the power supply.
PC. To upgrade the Firmware on LFH 9750/00: 3. Start the <DPMFirmwareV0220.exe> file. 4. Follow the instructions given by the DPM Firmware Upgrade Wizard. After starting the Test mode by pressing DL and DEL buttons and JOG Dial simultaneously the Display indicates the loaded Firmware version, e.g.