Panasonic WJ-NT314 Network Operating Instructions page 65

Symptom
No image is displayed (or too
dark).
Images are displayed
washed out.
Cannot adjust the focus cor-
rectly.
Flicker appears on the
screen.
Images cannot be saved on
the SD memory card.
"SD-MEMORY NOT
DETECTED" is notified in the
message of Panasonic alarm
protocol.
Cause/solution
• Is the brightness setting set at an appropriate level?
Click the [RESET] button of "BRIGHTNESS".
• Is the brightness setting set at an appropriate level?
Click the [RESET] button of "BRIGHTNESS".
• Is there dust or dirt on the transparent part (over the
lens) of the dome cover (camera shell)?
Clean the transparent part of the dome cover.
• Are objects hard to focus on with the auto focus func-
tion?
Adjust the focus manually.
• When flickers appear frequently, set the shutter speed
to "AUTO" or "1/100".
• Is "ON" selected for "Super Dynamic 3" ?
Set to "OFF".
• Is the SD memory card inserted correctly?
• Is the SD memory card formatted?
• When the power is shut down while saving images on
the SD memory card because of power failure, etc., it
may become impossible to write data on the SD
memory card. In such a case, format the SD memory
card after obtaining the images saved on the card.
• Isn't the write protect switch set to "LOCK"?
When the write protect switch is set to "LOCK", avail-
able size/total size indication of the SD memory card
will be "**********KB/**********KB".
• Isn't the SD memory card out of order?
There are limited times to overwrite on an SD memory
card. When frequently overwritten, it may be at the
end of product life. It is recommended to replace the
SD memory card.
Reference
pages
6
6
Operating
Instructions of
camera
6
Page 30 and
Operating
Instructions of
camera
Page 30 and
Operating
Instructions of
camera
Operating
Instructions
24
–
–
65