Panasonic WJ-NT314 Network Operating Instructions page 55

Configure the settings relating to the FTP periodic transmission [FTP periodic
transmission]
Click the [FTP] tab on the "Network setup" page. ( page 50)
The settings relating to the periodic transmission of images to an FTP server can be configured on this page. To
transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in advance.
( page 49) Refer to page 56 for descriptions of how to configure schedules of image transmission.
Important:
• Depending on the network line speed or the network traffic, images may not be transmitted at the exact designat-
ed interval or period.
• When "ON" is selected for both of the alarm image FTP transmission function and the FTP periodic transmission
function, the alarm image FTP transmission function will be given priority over the FTP periodic transmission
function. For this reason, images may not be transmitted at the exact designated interval or period if alarms
occur frequently.
• Image capture size and image quality of "JPEG setup" on the [JPEG/MPEG-4] tab are applied for the alarm
image to be transmitted. ( page 27)
I FTP periodic transmission
[To FTP setup]
When "To FTP setup" is clicked, the [FTP] tab of the
"Server setup" page will be displayed. ( page 49)
[FTP periodic transmission]
Select "ON" or "OFF" to determine whether or not to
transmit images using the FTP periodic transmission
function.
When "ON" is selected, it is necessary to configure the
settings of the FTP server. ( page 49)
The images from the selected channel will be transmit-
ted to the FTP server. ( page 26)
Default setting: OFF
[Directory]
Enter the directory name where the images are to be
saved.
For example, enter "/img" to designate the directory
"img" under the FTP root directory.
Number of characters that can be entered: 0 - 256
characters
Default setting: (blank)
[File name]
Enter the file name (name of the image file to be trans-
mitted) and select the naming option from the following.
With time and date: File name will be ["Entered file
name" + "CH number" + "Time and date (year/
month/day/hour/minute/second)" + "Sequence num-
ber (normally "00")"].
Without time and date: File name will be the charac-
ters entered for "File name" only. When "Without
time and date" is selected, the file will be overwritten
each time a file is transmitted newly.
Number of characters that can be entered: 1 - 8 char-
acters
Default setting: (blank)
[Interval]
Select the interval for the FTP periodic transmission
from the following.
1 sec/2 sec/3 sec/4 sec/5 sec/6 sec/10 sec/15 sec/
20 sec/30 sec/1 min/2 min/3 min/4 min/5 min/6 min/
10 min/15 min/20 min/30 min/1 hour/1.5 hours/2 hours/
3 hours/4 hours/6 hours/12 hours/24 hours
Default setting: 5 sec
55