AHXP13MRY
CHAPTER 5.
DISASSEMBLY PROCEDURE
[1] INDOOR UNIT
1) Remove power cord from OUTDOOR
UNIT.
2) Open open panel (reverse it) and remove
it by the direction shown in the picture.
(Pay attention to the three hooks.)
Hook
3) Remove the screw fixing cord holder
and then remove it.
4) Loosen 4 screws on terminal board
and remove Unit-to-Unit wire
connected with the board.
5) Slide out 2 air filter s.
5 – 1
AY-XPC12PU