Blocking The Wheel; Loosening Wheel Nuts - Toyota 2007 Tundra Owner's Manual

07 04.26
Keep winding until three clicks are
heard.
504

—Blocking the wheel

XS40011
2. Block the wheel diagonally op-
posite the flat tire to keep the
vehicle from rolling when it is
jacked up.
When blocking the wheel, place a
wheel block in front of one of the front
wheels or behind one of the rear
wheels.
2007 TUNDRA from Jul. '07 Prod. (OM34463U)

—Loosening wheel nuts

XS40015b
3. Loosen all the wheel nuts.
Always loosen the wheel nuts before
raising the vehicle.
Turn the wheel nuts counterclockwise
to loosen. To get maximum leverage,
fit the wrench to the nut so that the
handle is on the right side, as shown
above. Grab the wrench near the end
of the handle and pull up on the han-
dle. Be careful that the wrench does
not slip off the nut.
Do not remove the nuts yet—just un-
screw them about one−half turn.