Vivitar 38056 User Manual page 7

Turning On the Camcorder
When powering the camcorder ON for the first time, the camcorder will take you through the initial setup.
Powering the Camcorder ON
1) Batteries
Make sure the batteries have been inserted properly, according to the polarity shown inside the battery compartment.
Use 3 x AAA (1.5V) batteries. Alkaline batteries are recommended. Batteries not included.
Note:

Remove the batteries from the camcorder when not in use for an extended period.

Do not mix alkaline and non-alkaline batteries.

The energy status of the power is displayed on LCD as shown below:
Full battery power
2) SD Memory Card
Make sure an SDHC memory card has been properly inserted into your camcorder. SDHC card not included.
Using the Camcorder
Selecting
the modes
Medium battery power
7
Low battery power
Accessing
the menu