Vivitar 38056 User Manual page 24

Date/Time Menu
When you capture an image with your camcorder, the image will include a time stamp with the date and time that the image was
taken.
The Date/Time menu allows you to set your camcorder‟s date and time as desired. You can also disable the timestamp for
future images that will be taken with your camcorder.
On – The timestamp will appear on photos taken
Off – The date stamp will not appear on photos taken
To Enable/Disable the Timestamp:
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.
3) Press the UP or DOWN direction control buttons to scroll through the menu options.
4) Press the OK button to select and save the desired option.
5) A selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the MENU button to exit the menu and return to your previous mode.
8) Remember that this setting will be saved by your camcorder until you manually change the setting or restore the
camcorder‟s default factory settings.
To Set the Date and Time:
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.
Press the UP or DOWN direction control buttons to highlight the "Date Setup" menu option then press the OK button to
3)
select the option.
The "Date Setup" submenu will open.
4)
5) Scroll through the window with the RIGHT and LEFT direction control buttons.
6) For each field in the menu, use the UP and DOWN direction control buttons to set the date and time.
7) When you have finished setting the date and time, press the OK button to save your settings and return to the previous mode.
24