Table of Contents
Advertisement
Quick Links
Extractor
Tools
Operator's Manual and Parts List
ACTIVE MODEL: 59228A
OBSOLETE MODELS: 59231A, 59230A, 59229A
READ THIS BOOK
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your Clarke
machine could result in injury to you or to other personnel; damage to the machine or to other
property could occur as well. You must have training in the operation of this machine before using
it. If your operator(s) cannot read this manual, have it explained fully before attempting to operate
this machine.
All directions given in this book are as seen from the operator's position at the rear of the machine.
Form No. 79042A
5/01 REVISED 12/14 REV B
Advertisement
Table of Contents
Related Manuals for Clarke 59229A
Summary of Contents for Clarke 59229A
- Page 1 This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Clarke machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.
-
Page 2: Table Of Contents
4" Metal Hand Tool Assembly Drawing & Parts List ............. 9 8" Plastic Wand Assembly Drawing & Parts List ..............10 12" Metal Wand Assembly Drawing & Parts List ..............11 2 - FORM NO. 79042A CLARKE Extractor Tools Operator's Manual... -
Page 3: Operator Safety Instructions
Keep all fasteners tight. Keep the adjustments according to specifi cations. WARNING: Make sure that all the labels, decals, warnings, cautions and instructions are fastened to the tool. Replace them when necessary by ordering them from Clarke Technology. WARNING: Do not use water that is hotter than 140 °... -
Page 4: Introduction
Instructions for preparation and opera- tion of your extractor are given with the extractor. CAUTION: Clarke will not be held liable for damage to the carpet, or poor results because of operator's lack of training. To operate the 4" hand tools, follow this procedure:... -
Page 5: How To Operate The 8" And 12" Floor Tool
NOTE: Instructions for preparation and operation of your extractor are given with the extractor. CAUTION: Clarke will not be held liable for damage to the carpet, or poor results because of operator's lack of train- ing. CAUTION: Do not use water that is hotter then 140°F. -
Page 6: How To Clean The Carpet
7. Make a pass halfway along the edge of the carpet. 8. As you make more passes, repeat one inch of the area already cleaned. 9. Make more passes until all of the room is cleaned. 6 - FORM NO. 79042A CLARKE Extractor Tools Operator's Manual... -
Page 7: Maintenance
CAUTION: To prevent damage to the spray jet, do not push a wire or any object through the opening in the jet. Use a dry cloth to wipe the tool. CLARKE Extractor Tools Operator's Manual FORM NO. 79042A - 7... -
Page 8: 4" Plastic Hand Tool Assembly Drawing And Parts List
CLARKE 4" Plastic Hand Tool 59231A (Obsolete) PLASTIC Item Ref. No. Description 55179A Plastic Head w/tube 1-1/2” 59618A Vavle Assembly, Plastic VS Valve Hanger 1-1/2” Screw, S.S. Pan Hd 10-32 x 1-1/4” Nut, S.S. Hex 10-32 54060A Tube Comp.,1/8 MPT x 3/16” Ferrule... -
Page 9: 4" Metal Hand Tool Assembly Drawing & Parts List
CLARKE 4" Metal Hand Tool 59228A PLASTIC Item Ref. No. Description Head Assembly (Metal) 59618A Valve Assembly, Plastic 54060A Tube Comp., 1/8 MPT x 3/16” Ferrule VS Valve Hanger 1-1/2 Screw, S.S. Pan Hd 10-32 x 1-1/4” Nut, S.S. Hex 10-32... -
Page 10: 8" Plastic Wand Assembly Drawing & Parts List
CLARKE 8" Plastic Wand Assembly 59230A (Obsolete) Item Ref. No. Description 50383A Head and Tube Assembly Upper Tube 59616A Valve Assembly, Plastic Elbow, 45° Street Hose, Solution 38” 55177A Valve Hanger, 1-1/4” Cast Aluminum Screw, Pn Hd 10-32 x 1-1/4 S.S. -
Page 11: 12" Metal Wand Assembly Drawing & Parts List
CLARKE 12" Metal Wand Assembly 59229A (Obsolete) Item Ref. No. Description 59890A Wand Assembly 59615A Valve Assembly 85307A Screw, S.S. Pan Hd 10-32 x 5/8” 920722 Nut, S.S. Nylock 10-32 55809A Lever Valve Screw, S.S. Pan Hd. 10-32 x 1-1/8”... - Page 12 14600 21st Avenue North Plymouth, MN 55447-3408 www.clarkeus.com Phone: 800-253-0367 Fax: 800-825-2753 ©2014 Nilfi sk-Advance, Inc. A Nilfi sk-Advance Brand...
Need help?
Do you have a question about the 59229A and is the answer not in the manual?
Questions and answers