GE 26 Series Owner's Manual And Installation Instructions page 17

ATTACH THE FRESH FOOD
3
DOOR HANDLE
Stainless steel and plastic handles:
Attach the handle
A
to the handle
mounting fasteners
and tighten the set
screws with a 1/8"
Allen wrench.
ATTACH THE FREEZER DOOR HANDLE
4
Stainless steel and plastic handles:
Attach the handle firmly to the mounting
A
fasteners and tighten the set screws on
the bottom of the handle with a 1/8" Allen
wrench.
REMOVE THE REFRIGERATOR DOORS
5
A
Open the refrigerator doors.
Remove the two rectangular caps with a flat-head
B
screwdriver.
Installation Instructions
A
Mounting
Fasteners
A
REMOVE THE REFRIGERATOR DOORS
5
Remove the three screws on top with a Phillips-head
C
screwdriver.
Disengage the two electrical connectors.
D
To disconnect the water coupling, push in on the gray
E
coupling and pull out the tubing.
Gray
Coupling
Remove the two grounding cables with a Phillips-head
F
screwdriver.
Remove three 10 mm hex-head bolts (right and left).
G
CAUTION:
door may fall and cause personal injury and/or damage
to the door itself.
17
(cont.)
When the bolts are removed, the