Advertisement
With "PCL" the gates will surge up hard onto their closed position stoppers.
This mode is useful when installing an electric lock as it ensures the lock physically locks each time.
Below is an example of "PCL" Positive close mode working when Condominium mode, delay mode and strike lock mode are active.
Action
Momentary BT trigger.
Half a second after the
auxiliary relay has switched on.
Half a second after gate 1 has
started opening.
After preprogramed
overlapping gate delay time.
At full open position.
BT auto-close timer times out.
(Any BT trigger or safety beam
trigger while the timer is
counting down, resets the
timer)
After preprogramed delay
time.
At full closed position.
Ver: 2015.001
Advanced features.
"PCL" positive close mode.
Gates in the closed position
Auxiliary relay
activates.
Gate 1 begins
opening.
Auxiliary relay
deactivates.
Gate 2 begins
opening.
Gates stop.
Gate 2 begins
closing.
Gate 1 begins
closing.
Gates continue
to surge onto the
close stoppers
momentarily.
19
Response
No buzzer tones.
No buzzer tones.
No buzzer tones.
No buzzer tones.
No buzzer tones.
No buzzer tones.
No buzzer tones.
No buzzer tones.
Advertisement
