Onkyo TX-SA705 Service Manual page 148

OPERATION CHECK-1
SPEAKER PROTECT-1 (DC VOLTAGE DETECTION)
[When]
1. Exchange power transistors (Q6050 - Q6056, Q6060 - Q6066).
2. Exchange amplifier PC board ass'y (NAAF-9142).
[Procedure]
<Note>
No load. No input.
1. Press and hold down CD button, then press STANDBY/ON button while the unit is powered on.
" Test - _ " will be displayed only for 5 seconds.
Te s t - _
2. Press GAME/TV button, while the characters of " Test - _ " will be displayed.
The unit is in the state of " Test-4-00 ".
Te s t - 4 - 0 0
3. Repeatedly press TONE + button until the characters of " Test-4-22 " are displayed.
Te s t - 4 - 2 2
Check whether the operation starts and continues automatically as follows.
Te s t - 4 - 2 2
P r o te c t OK
Te s t - 4 - 2 3
P r o te c t OK
Te s t - 4 - 2 4
P r o te c t OK
Te s t - 4 - 2 5
P r o te c t OK
If all channels are OK, the characters of " Test - 4 - 36 " will be displayed.
Te s t - 4 - 3 6
4. Press STANDBY/ON button.
C l e a r
Blinks
Front L ch
Check
Tes t - 4-2 6
Prot e c t O K
Front R ch
Check
Tes t - 4-27
Prot e c t O K
Center ch
Check
Tes t - 4-28
Prot e c t O K
Surround L ch
Check
Turn off
TX-SR705/SA705
Surround R ch
Check
Surround Back L ch
Check
Surround Back R ch
Check