IC Audio RAC 02 + Media Player User Manual page 48

RAC 02 + Media Player
Getting started / setup
11.4 Network
The unit is compatible with all common network protocols and encryption methods, including Wi-Fi
Protected Setup (WPS).
To connect the unit to your network, you need one of the following:
- A wired router and an Ethernet (RJ45 network) cable
- A Wi-Fi wireless router, together with password key if set
Select WLAN region/country > Wi-Fi network (SSID), and then select a network from the list.
To connect to a wired network, select [Wired], after ensuring that the Ethernet cable from the wired
router is connected to the Ethernet socket of the unit.
If the network is open (non-encrypted), the
unit connects without any further ado; see
Completion below.
Standard encrypted network:
To enter the network's key (password), use the Select
control to move the cursor through the characters and
select. As each character is selected, the key is built up
near the top of the display.
There are three options accessible by turning Select back before the first characters (0123...) –
Backspace, OK and Cancel.
WPS encrypted network:
WPS encrypted networks are identified by '[WPS]' at the
start of the network name, and have three methods of
connection. Select one and follow the prompts:
ic audio GmbH
Boehringerstraße 14a; D-68307 Mannheim; Germany
12
EN
Fon: + 49(0) 621 / 77096-0; Fax: + 49(0) 621 / 77096-26
E-Mail: info@ic-audio.com; www.ic-audio.com
ic audio