IC Audio RAC 02 + Media Player User Manual page 47

RAC 02 + Media Player
Getting started / setup
11.3 Time / date
The time and date can be updated manually or automatically. With auto-update, the time and date
are automatically synchronized with external clocks. Auto-update is generally more accurate.
Auto-update:
Auto-update works with data sent over DAB, FM or the
Internet. The clock is only updated when in a
corresponding mode, so it is best to select a mode you
use regularly.
DAB and FM use time signals broadcast with radio transmissions.
Network uses a time signal sent from the Frontier Silicon Internet radio portal when in any network-
connected mode.
- Select Update from DAB, Update from FM, Update from Network or No update.
- If you are updating from the network, set your time zone.
- If your country uses daylight saving time, the automatically updated time from the network
may be wrong by one hour. When daylight saving times are in effect (during the winter), turn
on the Daylight savings option to rectify this.
Note that if you are updating the time from DAB or FM, the Daylight savings option has no effect on
the clock's time.
The unit will auto-update from the selected source when time information is available.
Manual set:
If you set No update, the wizard now prompts you to set
the time and date manually.
The date and time are displayed as dd-mm-yyyy and
hh:mm AM/PM with the first value, dd, active (flashing).
Adjust each value with the "Select control". As each
value is set, the next value becomes active and flashes.
ic audio GmbH
Boehringerstraße 14a; D-68307 Mannheim; Germany
11
EN
Fon: + 49(0) 621 / 77096-0; Fax: + 49(0) 621 / 77096-26
E-Mail: info@ic-audio.com; www.ic-audio.com
ic audio