Additional Safety Instructions - Stanley SIG 2500 Original Instructions Manual

Digital fuel generator
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
even danger to life.
Keep this operating manual carefully.

3. Additional safety instructions

Secure the generator against shifting and toppling
during transport.
Place the generator at least 1m away from buildings
and the equipment connected to it.
Do not expose the tools to damp or dust. Permissible
ambient temperature – 10 to + 40°C, max. altitude
above sea level 1000 m, relative humidity: 90 % (non-
condensing).
Check the generator for damage and leakage before
every use.
Keep the generator away from flammable liquids,
gases or dusts. The generator must not be operated in
environments with flammable liquids, gases or dusts.
Operate the generator on a level surface. Otherwise,
fuel will be spilled.
Have the installation carried out only by a specialized
electrician in order to satisfy all legal requirements.
Keep children and pets away from the generator.
Wear suitable clothes. Don't wear loose clothes or
jewellery. Keep hair, clothes and gloves away from
moving parts.
Always refuel in well ventilated places.
Fuel is extremely flammable and under certain
conditions also explosive.
Switch the engine off and refuel in well ventilated
rooms. Wipe up fuel immediately in case of overflow.
Never touch the generator with wet hands.
Protect the generator from rainfall or snowfall.
If this generator is damaged, it has to be repaired by
the manufacturer or their customer service or a qualified
person in order to avoid any risks.
Exhaust gases are toxic! Only operated the generator
outside, in well ventilated places.
Be careful when refuelling and handling fuel and oil
in any way. In case of contact with skin and inhalation
(vapours!), they are detrimental to health.
In order to avoid electric shocks, use only overload
switches recommended by the manufacturer.
Attention! Defective overload switches may only be
replaced with identical overload switches
with identical performance data.
Due to the high mechanical loads, only rubber cables or
similar designs may be used.
When using the extension cable, please note the
following:
Guard against electric danger. When working outdoors,
use only extension cables that are approved for outdoor
use and which are marked accordingly (HO7RN-F).
The overall length of the extension cables used may not
2
exceed 50 m for 1.5 mm
7
2
and 100 m for 2.5 mm
.
G
B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents