Yamaha MCR-E810 Owner's Manual page 44

Radio Data System Tuning (U.K. and Europe Models Only)
Additional CT (clock time) settings
You can use CT information received from the Radio Data
System stations to adjust the built-in clock of the receiver.
STANDBY/ON
POWER
TV
1 2 3 4
5 6 7 8
SCAN DIMMER
9 0
REPEAT A-B
TV CH
FREQ/TEXT
PROG
PTY SEEK
MODE START
TV INPUT SHUFFLE
ON SCREEN MENU
PRESET
INFO.
A-E ENTER A-E
TOP MENU
SET UP /RETURN
TV VOL VOLUME
DISPLAY
SLEEP
DVD/CD TUNER BAND
TAPE/MD AUX/TV DOCK
SUBTITLE ANGLE ZOOM AUDIO
1
While tuning into a Radio Data System
station, press DISPLAY repeatedly so that the
clock appears in the front panel display of
the receiver.
2
Press FREQ/TEXT once.
"CT→Clock" appears in the front panel display.
42
En
FREQ/TEXT
PTY SEEK START
PTY SEEK MODE
DISPLAY
TUNER
3
Press PTY SEEK MODE repeatedly to select
"CT→Clock" or "Local CT", and then press
PTY SEEK START to switch the setting
between "ON" and "OFF".
CT→Clock
Set this to "ON" if you want to apply CT information
received from the Radio Data System stations to the
built-in clock of the receiver. (The default setting is
"ON".)
Local CT
Set this to "ON" if you want to apply the daylight
saving time or summer time to CT information
received from the Radio Data System stations. (The
default setting is "ON".)
4
Press FREQ/TEXT to confirm the settings.