Selecting Preset Stations; Erasing The Preset Stations - Onkyo CS-265 Instruction Manual

Listening to the Radio—Continued

Selecting Preset Stations

You must store some presets before you can select them
(see page 25).
1
Press the [TUNER] button to change the
input source to "FM" or "AM".
The preset you selected the last time you listened
to the radio will be selected.
2
Use the [7]/[6] buttons to select a
preset.
Tip:
• If you press the remote controller's [TUNER] button
while the CD receiver is in standby mode, the power
to the CD receiver will be turned on automatically,
and the station that you listened to last will be tuned
in.

Erasing the Preset Stations

1
Press the [7]/[6] buttons to select the
preset station you want to erase.
2 Press the [MENU] button, use the [q]/[w]
buttons to select "PresetErase>", then
press the [ENTER] button.
3 Make sure you are going to erase a correct
preset number, then press the [ENTER]
button.
To cancel erasure, press the [MENU] button
instead.
26
En-