Connection To Mobile Phones, Gps Devices And Mp3 Players; Mobile Phone - Cardo Systems Louis User Manual

CONNECTION TO MOBILE PHONES, GPS DEVICES AND MP3 PLAYERS

Your unit has two Bluetooth channels for connection to mobile phones, GPS devices and music
players with A2DP.
PAIRING BLUETOOTH CHANNELS 1 AND 2
1. Make sure Bluetooth is enabled on your phone/GPS/MP3 player.
2. To pair Bluetooth Channel 1 – In Standby, press
begin rapidly alternating.
To pair Bluetooth Channel 2 – In Standby, press
LEDs begin rapidly alternating.
When pairing a GPS, once LEDs begin rapidly alternating, tap
3. Search for Bluetooth devices on your phone/GPS/MP3 player.
4. Select "Louis Edition" and enter 0000 (four zeros) if required.
5. After pairing has succeeded, the LED will begin flashing slowly in BLUE.
6. If Pairing is not completed within 2 minutes, the unit will return to Standby.
• If you have paired 2 different mobile phones directly to your unit, you will need to set one as
default for making calls.
• If your GPS supports it, you can pair the second mobile phone directly to the GPS and then pair
the GPS to your unit, and so connect both mobile phones and the GPS.
• After pairing, you may need to tap

MOBILE PHONE

Answer a call
Reject a call
End a call
Voice Dial*
(if supported by mobile phone)
Redial*
Hot-Dial
†
Set default phone
Toggle default phone
*
This feature is not available during mobile calls
†
To use the Hot-Dial, first configure the number via the Cardo Community or Cardo SmartSet App
+
for 5 seconds until the RED and BLUE LEDs
-
for 5 seconds until the RED and BLUE
W
to connect.
W
Tap or say any word loudly to answer by VOX
Remain silent for 15 seconds, or press and hold
W
Tap
W v
Tap and simultaneously and follow the prompt from
the mobile
W v
Press and for 2 seconds
W
Tap three times
When on a phone call, press
W
In Standby, press for 5 seconds
.
W
for 2 seconds
+
for 5 seconds
scala rider
|
Qz
®
13