General Functions; Voice Connect (Vox) Settings - Cardo Systems Louis User Manual

GENERAL FUNCTIONS

Power ON / OFF
Volume
Mute
STATUS LIGHTS
None
1 BLUE flash every 3 seconds
2 BLUE flashes every 3 seconds
1 RED flash every 3 seconds
2 RED flashes every 3 seconds
Solid RED

VOICE CONNECT (VOX) SETTINGS

Your unit features VOX technology for safe and hands-free operation of key functions.
You can use the VOX to make Intercom Calls to your Priority Intercom Channel.
VOX Intercom calls will end automatically after 30 seconds of silence.
Answer a phone call
Reject a phone call
Call Priority Intercom Channel
Set Priority Channel
(Default: Channel A)
VOX Sensitivity
(Default: Medium)
Enable/Disable VOX
(For Intercom calls only)
v
Press for 2 seconds
ON: 3 BLUE flashes + Ascending tone
OFF: 3 RED flashes + Descending tone
+ -
Tap or to adjust and set volume of current audio source
+ -
Tap and simultaneously
Unit is OFF
Standby mode - No active audio
Active mode – Call in progress / music or other audio
source is ON
Standby mode – Battery is low
Active mode – Battery is low
Charging
Speak any word loudly into the microphone
Remain silent for about 15 seconds
Speak any word loudly into the microphone
+
Press
selected channel
High: Use this setting if it is difficult to activate VOX
Low: Use this setting if it is too easy to activate VOX
In Standby, press
• Enable: Blue flash for 2 seconds
• Disable: Red flash for 2 seconds
for 5 seconds during intercom call with the
and simultaneously for 2 seconds
scala rider
|
Qz
®
11