Panasonic HC-VX870 Owner's Manual page 161

Changing the home monitor settings of this unit
≥ Setting cannot be performed while operating monitoring with a smartphone.
Touch [Setup] and select desired setting.
∫ [Home Monitor Connect]
You can display the registration screen for a Device ID and Password.
≥ If [QR code] is touched, a QR code will be displayed on the screen of this unit.
∫ [Remote Voice Level]
You can set the initial remote voice level and speaker volume level of the remote voice function.
(Volume high)/ (Volume low)
≥ The mode cannot be switched to another one during home monitoring operations.
≥ Although home monitoring can be performed with the battery, we recommend you use the AC
adaptor.
≥ It is recommended to use this unit fixed so that it will not move since it may cause false detection.
≥ Power of this unit will automatically turn off when monitoring condition continues for
approximately 10 days.
≥ [REC MODE] is set to [HE].
≥ [ZOOM MODE] is set to [Opt.Zoom 20k].
≥ The following recording modes are not available
j Creative Control Mode
j HDR Movie Mode
j FULL HD Slow Motion Video Mode
j WX970 VX870
/
4K Photo Mode
≥ Backup for Twin Camera is not available during home monitoring.
≥ If you record an image when the LCD monitor of this unit is closed with the screen facing outward,
the LCD monitor turns off.
≥ The password for the home monitor settings will change when [Reset Wi-Fi Settings] is
performed. Set the home monitor settings of the smartphone again and reconnect to this unit
when [Reset Wi-Fi Settings] is performed.
(l 53):
- 161 -