Using [Link To Cell] With A Wireless Access Point Connection - Panasonic HC-VX870 Owner's Manual

≥ The following operations allow you to register up to ten smartphones. If the number exceeds ten,
smartphone information with the oldest registration date and time will be deleted.
j Touching an NFC-compatible smartphone on this unit.
j Setting [Direct Connection Password] to [OFF] and connecting this unit and a smartphone
directly.
≥ Please refer the instructions for the device you are using for information on how to set up and use
a NFC-compatible smartphone.
Using [Link to Cell] with a wireless access point
connection
∫ If the device is Android (NFC-compatible)
≥ Set the NFC function of the smartphone to ON.
1
Connect the smartphone to a wireless access point.
≥ When you connect using NFC for the first time, please make connection of this unit and a
wireless access point. (l 178)
2
Start up the smartphone application "Image App".
3
Touch the smartphone on
≥ Touch the NFC touch area while the NFC mark is displayed on
the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit,
touch [YES] on the screen of this unit, and then touch the
smartphone on of this unit again.
≥ If the unit is not recognized even when touching the
smartphone, change positions and try again.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
≥ You cannot set up a connection when recording an image with this unit.
≥ This unit is turned on even if it touches the smartphone on
turned off with a LCD monitor.
If you touch the second smartphone when this unit has already been connected
to the first one
The remote operation with the first smartphone that has been connected to this unit will be cut off,
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recording or copying a file to the
smartphone during remote operations.
of this unit.
of this unit, where this unit is
- 148 -