Demo Mode; Firmware Version Info/Upgrade; Media Status - Panasonic HC-VX870 Owner's Manual

[MEDIA STATUS]

The used space and remaining recordable time of the SD card can be checked.
: [SETUP] # [MEDIA STATUS]
MENU
≥ The remaining recordable time in the currently set Recording Mode is displayed only in the
Motion Picture Recording Mode.
≥ Touch [EXIT] to close the indication.
≥ The SD card requires some space to store information and manage system files, so the actual
usable space is slightly less than the indicated value. The usable SD card space is generally
calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are
expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of
the capacity appears to be smaller.
[Firmware Version Info]
The firmware version of this unit is displayed.
: [SETUP] # [Firmware Version Info]
MENU
[Firmware Upgrade]
You can update the firmware version of this unit.
: [SETUP] # [Firmware Upgrade]
MENU
For the latest update information, check the support website below. (As of December
2014)
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only)

[DEMO MODE]

This item is used to start the unit demonstration.
: [SETUP] # [DEMO MODE] # [ON]
MENU
≥ If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted and
while this unit is connected to the AC adaptor, the demonstration automatically starts.
If any operation takes place, the demonstration is canceled. However if no operations take place
for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration,
set [DEMO MODE] to [OFF] or insert an SD card.
≥ When Demo Mode is in operation, the lens cover remains open.
- 40 -