Changing A Wiper Blade; Very Cold Climate Screen - CITROËN DS 4 Handbook

Changing a wiper blade

Before removing a front
wiper blade
F Within one minute after switching off
the ignition, operate the wiper stalk to
position the wiper blades vertically on the
windscreen.
Removing
F Raise the corresponding wiper arm.
F Unclip the wiper blade and remove it.
Fitting
F Put the corresponding new wiper blade in
place and clip it.
F Fold down the wiper arm carefully.
After fitting a front wiper
blade
F Switch on the ignition.
F Operate the wiper stalk again to park the
wiper blades.

Very cold climate screen*

Removable protective screen which prevents
the accumulation of snow at the radiator
cooling fan.
Fitting
F Offer up the very cold climate screen to
the front of the lower section of the front
bumper.
F Press around its edge to engage its fixing
clips one by one.
Removal
F Use a screwdriver as a lever to release
each fixing clip in turn.
Do not forget to remove the very cold
climate screen when:
the ambient temperature exceeds 10 °C,
-
towing,
-
driving at speeds above 75 mph
-
(120 km/h).
* Depending on the country of sale.