Table of Contents
Advertisement
Figure 9
1. LED indicator (2)
3
Figure 10
1. LED indicators (level of
charge)
2. Release button
2. Slide the battery into the charger until it clicks into place.
3. Press down on the release button and slide the battery
backward out of the charger.
2. Insert battery here
2
G016223
3. Battery terminal
4. Refer to the table below to interpret the LED indicators on
the battery charger.
LED COLOR
Left
Right
Red
Red
Red
Green
Red
Orange
Adjusting the Handle Height
and Base Orientation
•
To adjust the auxiliary handle height, release the auxiliary
handle latch, slide the auxiliary handle up or down to the
desired height, then secure the auxiliary handle in place by
closing the auxiliary latch
1
1. Auxiliary handle
•
To adjust the orientation of the base, press down on the
rotator button located at the base of the shaft, then move the
base to face the desired direction
1
1. Rotator button
8
Indicates:
Battery is charging
Fully charged
Battery is too
warm: Remove
it for approximately
30 minutes
(Figure
11).
Figure 11
2. Auxiliary handle latch
(Figure
12).
G015683
Figure 12
Advertisement
Table of Contents
