Led Multi-Purpose Display; Before First Use; Charging - Philips AT815 User Manual

ENGLISH
10

LED Multi-Purpose Display

The display provides the following information:
◗ Charging Indicator
C
-When the shaver is charging, the charging light
blinks green.
◗ Full Charge Indicator
C
-When the battery is fully charged, the charging
light lights up green continuously. After
approximately 30 minutes the charging light goes
off to save energy.
◗ Low Battery Indicator
C
-When the battery is almost empty (5 or less
shaving minutes left), the charging light blinks
orange. When you turn the shaver OFF the
charging light continues to blink orange for a few
seconds.
Q Quick Charge Indicator
-When you charge the empty battery, the
charging light alternately blinks orange and green.
After approximately 3 minutes, the charging light
continues to blink green.
- The shaver now contains enough energy for a
5-minute shave.
C
Q Shaver Head Replacement Indicator
-Once a year, depending on your shaving behavior,
the shaver head replacement symbol will light up
orange continuously, as a reminder to replace the
shaving heads.

Before First Use

Q Charge the shaver before you start using
it (see 'Charging'). Make sure the shaver is
switched off before you start charging it.
Important
Q Only use the power cord provided to charge
the shaver.
Q The power plug transforms 100-240V AC to
less than 24V DC.

Charging

Q Charging or recharging at temperatures
below 40ºF/4,5ºC or higher than 95ºF/35ºC
adversely affects lifetime of batteries.
Q If the shaver is subjected to a major change
in temperature, pressure or humidity, let it
acclimatize for 30 minutes before using.
Q Charging or recharging requires one full hour.
Q A fully charged shaver has a cordless shaving
time of up to 50 minutes.
Q When charging shaver for the first time or
after a long period of non-use, charge until
the charging light lights up green continuously.
Q Do not charge shaver in a pouch.
ENGLISH
11