Trelawny Challenger VL203 Operation And Maintenance
Needle/chisel scaler
Hide thumbs
Also See for Challenger VL203:
- Operation and maintenance manual (12 pages) ,
- Operation & maintenance manual (16 pages)
Advertisement
Advertisement
Table of Contents
Related Manuals for Trelawny Challenger VL203
Summary of Contents for Trelawny Challenger VL203
- Page 1 VL203/223 & 303 CHALLENGER NEEDLE & CHISEL SCALERS OPERATION & MAINTENANCE...
-
Page 2: Operation
Safety Before operating, performing maintenance or repairing Always, read instructions first before use. the Challenger VL203/223 & 303 Needle/Chisel Scalers, this manual must be read and understood. If in any doubt, Do - ask your supervisor before using this equipment. -
Page 3: Maintenance
(25). Take care not to invert the Needle Scaler while its full capacity. removing the Front Tube or the Piston may fall out of the Handled correctly the Challenger VL203/223 & 303 Intermediate Tube. Needle Scalers will work quickly and efficiently. - Page 4 MAINTENANCE Cylinder Ball Valve replacement collar half a turn to lock the Chisel in place. This is a consumable item and will require replacing after To release the Chisel, rotate the knurled collar until the approximately 120 -160 hours use; this is dependant on retaining ball is fully visible and remove the Chisel.
-
Page 5: Exploded View
EXPLODED VIEW... -
Page 6: Parts List
PARTS LIST ITEM PART No. DESCRIPTION ITEM PART No. DESCRIPTION Common Parts Common Parts 615.3021 Valve Cap 636.3003 Valve Pin 809.0139 Valve Cap O’Ring 704.3101 Chisel 1/2” Sq Shank 7” x 3/4” Blade 712.3022 Valve Spring 704.3103 Chisel 1/2” Sq Shank 7” x 2 1/2” Blade 618.3022 Valve Stem 704.3205... -
Page 7: Technical Specification
© Copyright 2009, Trelawny SPT Limited, CV31 1XT. UK All rights reserved. Any unauthorised use or copying of the contents or part thereof is prohibited. This applies to trademarks, model denominations, part numbers and drawings. Use only genuine Trelawny spares.
Need help?
Do you have a question about the Challenger VL203 and is the answer not in the manual?
Questions and answers