Table of Contents
Advertisement
Wireless N PCI-E Adapter User Guide
Chapter 4 Tenda UI Guide
If you select install both driver and Tenda adapter utility, .then both of them
will be installed on your PC. All features on the adapter can be configured and
implemented through the Tenda adapter utility (abbreviated to UI).
To start the Tenda UI, select Start-> Tenda-> Wireless Utility or directly click
Wireless Utility shortcut from your desktop.
4.1 Frequency Band Setup
This PCI-E wireless adapter operates on 2.4Ghz band only and may need to
operate on different channels depending on your country.
4.2 Wireless Network
Wireless network displays all available wireless networks in the area and lets
you see at a glance MAC address, channel, network mode, signal strength,
authentication mode, encryption mode and/or WPS authentication of each AP.
Also, you can select to connect to the desired wireless network.
Before connecting to a wireless network, click Refresh to update the available
wireless network list, select a desired wireless network and then click
Advertisement
Table of Contents
