Miele STB 201 Operating Instructions Manual page 82

en-US
Maintenance

Always disconnect the vacuum
cleaner from the electrical supply for
cleaning and maintenance work on
the Turbobrush. Switch off at the
wall socket and remove the plug.
Removing threads and hairs
(Fig. 04 - 06)
 With a pair of scissors (Fig. 04), cut
any threads or hairs that have beco‐
me entangled on the roller brush.
Then run the vacuum cleaner to vac‐
uum up the bits.
For more tangles or blockages inside
the Turbobrush, the cover can be
opened. Any large particles can then be
easily removed.
 Unlock the roller cover on both sides
with a coin and remove the roller co‐
ver (Fig. 05).
 Remove any dirt from the interior and
from the roller brush.
 Replace and engage the roller cover
(Fig. 06).
82