Chevrolet Beat Owner's Manual page 124

120 Vehicle Care
Center High-Mounted
StopLamp (CHMSL)
Bulb Type CHMSL
1. Open the tailgate.
2. Remove the two screws and the
lamp housing. Disconnect the
wiring harness connector before
removing the lamp housing.
3. Remove the two screws and the
reflector assembly.
4. Remove the bulb by pulling it
straight out of the bulb holder.
5. Install a new bulb.
6. Reinstall the lamp housing.
LED Type CHMSL*
Have the bulbs replaced by the
CHEVROLET retailer.
License Plate Lamp
1. Unscrew both screws.
2. Remove bulb housing downward,
taking care not to pull on the cable.
Rotate bulb holder anti-clockwise
to disengage.
3. Remove bulb from holder and
renew bulb.
4. Insert bulb holder in bulb housing
and rotate clockwise.
5. Insert bulb housing and secure
using a screwdriver.