Advertisement
In the seam number 4 or 5 appears in the display following indicates.
e. g. SP: 01 = 3000 RPM
With the functional key F3 can be selected in the parameter list. By pressure
on the key the parameter number increases (arising). With the functional key
F4 one gets again in the parameter list downwards (descending). After print on
the functional key F2 flashes the Curser on the first position can be changed,
after renewed pressure on the key F2 walks Curser a place farther to the right.
Now the numerical values can be raised with the help of the keys F3 and F4 or
be reduced
With the key P the given value is confirmed
After renewed one press of the key P the seam program is indicated again.
.
4 After press of the key F4
The even menu 1 in opens the different test programs and seam sequences
can be selected.
e. g. Menu : 1>
DIAGNOSTIK
With the key F3 get in to the level of the seam-sequences in the order the to
make your own program.
e. g. MENU : 2>
SEQUENZEN
With the key F2 the display opens for the seam sequences in this program.
e. g. M01 0
this means:
in the seam consequence M01 nothing (0) is assigned at the moment.
With F4 a seam can be assigned with the keys F3 /. Afterwards the cursor with
the key F2 on the next input position is brought and is assigned from out there
with the keys F3 / F4 the next seam. It can be put up to 5 Sewed seam
sequence .
e. g. M01 2 3 4 1 5
e. g. Program M01
4
Advertisement
