Related Manuals for A-S-S BASS 2020
Summary of Contents for A-S-S BASS 2020
- Page 1 Working Instructions Automatic single head serging unit for sewing of front- and back trouses without knee lining BASS 2020 / 1 Tel.0049 6028 / 9916-0 Fax.0049 6028 / 9916-20 info@assag.de...
- Page 2 Instruction Manual 2020 Programm buttons: F1 Cursor to the left M01 1 2 3 4 5 F2 Cursor to the right F3 Cursor roll upwards F4 Cursor roll downward Enter Button 1 After pressing the button P/ The new allocation of the function keys will appear in the display, F1-F4 Key F1 opens the basic parameters (GP) , Key F2 opens the spezial parameters (SP) , Key F3 has no function...
- Page 3 e.g. GP: 01 = 0.5 sec ERROR TIME ANF The functional key F3 is used to select the parameters in the list or basic settings. Through pressuring on the key the parameter number increases accordingly .By pressing function key F4 the parameter number decreases once more.
- Page 4 In the seam number 4 or 5 appears in the display following indicates. e. g. SP: 01 = 3000 RPM With the functional key F3 can be selected in the parameter list. By pressure on the key the parameter number increases (arising). With the functional key F4 one gets again in the parameter list downwards (descending).
- Page 5 Pre seam No 2 waistband seam Pre seam No 3 fly or seat seam seam No 4 inside seam Pre seam No 1 buttom seam seam No 5 outside seam with stacker 5 Program change Push key F2 in order to move the curser to the right. With F3 or F4 you can change for higher or lower Programs number.
- Page 6 5.4 Defined Threads Every Seam has a number which you just have to select. 01 = Pre seam for Buttom seam 02 = Pre seam for waist seam 03 = Pre seam for Fly or Seatseam Note: On Pre seam you cannot use the stacker ! 04 = Inside seam 05 = Outside seam...
- Page 7 Diagramm Steuerung 2020 Automated-Sewing-Systems Taste P/ DIAGNOSTIK I / O TEST SERVICE TEST SPEICHER TEST EEPROM I / O DAUERTEST ANALOG INP DONGLE ANALOG OUT I/O ADAPTER TEST RS 232 TEST Sewing SPEED SEQUENZEN Sewing Motor EFKA INIT INIT PARAMETER INIT GLOB PAR INIT SPEZ PAR SEAM COPY...