4. PURGING PROCEDURES, LEAK TEST, AND TEST RUN
4-1. PURGING PROCEDURES AND LEAK TEST
5. RELOCATION AND MAINTENANCE
5-1. REMOVING AND INSTALLING THE PANEL ASSEMBLY
Removal procedure
Installation procedure
5-2. REMOVING THE INDOOR UNIT
4-2. TEST RUN
Checking the remote (infrared) signal reception
4-3. AUTO RESTART FUNCTION
Caution:
To the user
4-4. EXPLANATION TO THE USER
5-3. PUMPING DOWN
When pumping down the refrigerant, stop the compressor before disconnecting
the refrigerant pipes. The compressor may burst if air etc. get into it.
WARNING