Table of Contents
Advertisement
Quick Links
Instruction
Manual
PC585
© 1998 Digital Security Controls Ltd.
• W A R N I N G •
1645 Flint Road, Downsview, Ontario, Canada M3J 2J6
This manual contains information on limitations regarding product
Printed in Canada 29002704 R0
use and function and information on the limitations as to liability of
the manufacturer. The entire manual should be carefully read.
TM
Security Products
Advertisement
Table of Contents
Related Manuals for Digital Security Controls PC585
Summary of Contents for Digital Security Controls PC585
- Page 1 Instruction Manual PC585 © 1998 Digital Security Controls Ltd. • W A R N I N G • 1645 Flint Road, Downsview, Ontario, Canada M3J 2J6 This manual contains information on limitations regarding product Printed in Canada 29002704 R0 use and function and information on the limitations as to liability of the manufacturer.
-
Page 2: Limited Warranty
• damage incurred in shipping or handling; General System Operation Digital Security Controls Ltd. will at its option repair or replace out- • damage caused by disaster such as fire, flood, wind, earthquake of-warranty products which are returned to its factory according to or lightning;... -
Page 3: System Information
System Information Fire Escape Planning There is often very little time between the detection of a fire and the time it becomes deadly. It is thus Fill out the following information for future reference and store this manual in a safe place. very important that a family escape plan be developed and rehearsed. -
Page 4: Fire Alarm Operation
Fire Alarm Operation Access Codes Alarm Access Codes are used to arm and disarm the system. There are 33 access codes available: one On a fire alarm, the bell or siren will pulse ON and OFF. The transmission of the alarm to the monitoring Master Code and 32 access codes. -
Page 5: Alternate Arming Methods
Alternate Arming Methods Door Chime Feature The door chime feature is used to provide a tone from the keypad each time a door or window is Away Arming opened or closed. The doors and windows which will provide this indication are programmed by your Arming the system in the Away mode will have all interior zones and perimeter zones active. -
Page 6: Setting The System Date And Time
Setting the System Date and Time Disarming the System To set the system time, enter [ ] [6] followed by the Master Code. Press [1]. The keypad will now Disarming from an LED Keypad: accept 10 consecutive digits: Enter the premises through a designated Exit/Entry door; entering by any other door will sound an •... - Page 7 If An Alarm Sounds Viewing Trouble Conditions The control panel continuously monitors a number of possible trouble conditions. If one of these Fire Alarm trouble conditions occur, the keypad will beep twice every 10 seconds until you press any key on the If your system has been installed with fire detectors and the alarm sounds in a pulsing mode, follow keypad.
-
Page 8: Zone Bypassing
Programming codes from an LCD Keypad: Zone Bypassing Master Code The zone bypassing function is used when access is needed to part of the protected area while the Press the [ ] key to enter the function list. Scroll (< >) to... system is armed. - Page 9 PC1555RKZ LED Keypad PC5508(Z) LED Keypad LCD5500(Z) Keypad System Light (PC1555RKZ): If the System light is ON, one or more of these conditions could be present on the system: System Busy System Troubles (See “Viewing Trouble Conditions” on page 11). Alarm Memory (See “Disarming the System”...
-
Page 10: Please Read Carefully
WARNING Smoke Detectors Please Read Carefully Smoke detectors that are a part of this system may not properly alert occupants of a fire for a number of reasons, some of which follow. The smoke detectors Note to Installers may have been improperly installed or positioned. Smoke may not be able to This warning contains vital information.
Need help?
Do you have a question about the PC585 and is the answer not in the manual?
Questions and answers