Table of Contents
Advertisement
2.4 Mouse Operation
On different status, the mouse operation has different definition.
Left Click
Right Click
Double Click
Moving Mouse
Sliding Mouse
3.
Main Interface
3.1
Log in
To boot up DVR system, please turn on the power button in rear panel and wait moment for system initializing.
On screen, right click the mouse will pop-up a right-click menu. Select Main Menu will enter System Menu interface (DVR default setting is password disable). If you have
set password enable, the User Login dialog interface will pop up. Please input correct password to login to DVR. De
recommended to change the password after you finish the system configuration.
Note: Before using the DVR to record, you must format the HDD in system menu. If DVR doesn't detect HDD, It will give sounds warning and a message of "NO Hard disk"
display on screen.
On menu locked mode, click to enter pop-up menu and then click any sub menu to pop up Log-in window. On menu unlocked
mode, click to enter pop-up menu or sub-menu directly.
After enter main menu, click left key could enter any sub-menu. On [File List] menu mode, click left key could playback one
recording file.
Change the status of check box and motion detection area.
Click combo box to display drop-down menu
Click left key in preview mode could popup color control bar and volume control bar.
Click left key could select value when appear edit box or drop-down menu and support Chinese word input, special symbol,
numeric and character input, replace [Enter-
In preview mode, right click to pop-up right-click menu.
On main menu or sub-menu mode, clicking right key will exit current menu.
In preview mode or playback mode, double-click left key will maximize the screen. On the [File List] menu mode, double click
will playback one recording file.
Moving cursor between items of menu interface.
On motion detect setup mode, sliding mouse will select motion area. On [Color set] menu mode, sliding mouse will move color
control slider and volume control slider.
] , [Backspace
].
fault password of "Admin" and "User" is empty. It is
6
Advertisement
Table of Contents
