Table of Contents
Advertisement
4.3
Network
In main menu interface click NETWORK icon to enter Network Setup interface (below illustration). Please input correct parameters in this page otherwise network function may
work abnormally.
Operation steps:
1. Choose channel number to setup
2. Choose record mode icon (Red icon means alarm record. Green
icon means continuous record. Grey icon means no record)
3. Following step 2 to click the time bar to set recording time
schedule. One block in the time bar means one hour.
4. Click Apply button to save settings.
5. Repeat above steps to configure other channel one by one.
Use COPY feature to clone one day's setting to another day
If you don't have a legal IP address for the DVR but connect DVR to internet through a
public router, please configure the router to map the media port and web port to the DVR
LAN IP address.
Host Port: 9000
Web Port: 8080
LAN IP address of DVR: 192.168.1.100
Remote user visit DVR by input http://router's IP:8080.
For your attention, if you use mobile phone for remote viewing, don't forget to map
mobile phone port, Refer to section MOBILE.
11
Advertisement
Table of Contents
