Table of Contents
Advertisement
In main interface, right click camera image on screen, from right-click menu select PTZ to bring up the PTZ SETUP interface.
Click arrow button to move camera, click the ZOOM/FOCUS/IRIS to adjust lens. Click the central circle button to run auto-pan.
6.
Backup Player
Before playing the backup video, please install the player program from software CD. Double click the PlaybackSetup.exe to initial installation. After finish
installation, there is a shortcut Playback Software icon on desktop. You can run it to view backup video on your PC.
If you install the program AVIGenerator.exe in your PC, you can run it to convert the backup H.264 video to AVI format. Most of popular video player support AVI
Set preset point steps:
1. Click CRUISE SET button to bring up CRUISE SETUP interface.
2. In Cruise Setup panel choose PTZ camera channel number
3. Choose CUR. POINT number (current preset)
4. Move camera to aim position by click arrow button. If you want to adjust lens, please return to
PTZ Setup panel to set zoom/focus/iris then enter this interface again.
5. Click SET button to save preset position. Repeat step 1 to 3 to set other preset points. Click
Save button to save the settings. Max presets number is 128.
Call preset: Choose CUR.POINT number then click GOTO button.
Cruise Setup Steps:
1. Choose PTZ camera channel number
2. Choose CUR. POINT number (current preset) as start point of cruise
3. Set STOP TIME for each preset point (stop point) then save it
Run Cruise:
Select START CRUISE to run PTZ touring from right-click menu.
Clean: Clear the cruise setting
18
Advertisement
Table of Contents
