Panasonic RAMSA WR-DA7 User Manual page 61

25. New factory default settings
Previous Version: The factory defaults for the AUX Sends and the BUS
Channels were OFF. The Fader Levels for the Aux Sends and BUS Channels
were (– ∞ dB).
Version 2.0: The factory defaults for the AUX Sends and the BUS Channels
are now ON.
The FADER Levels for the AUX Sends and BUS Channels are now set to
±0dB.
26. New LCD Display default Change
Previous Version: Several windows in the LCD display were hot highlighted.
Version 2.0: Now, once you change the value in the [TIME BASE], [SETUP]
or [EXECUTE] area in the [AUTOMATION] window, and the [SAMPLE] value
of the [DELAY] area in the [DYNAMICS] window, along with the other
parameters, will display their values in reverse video until you press the
[ENTER] key.
27. New default setting for Compressor/Limiter
Previous Version: The default setting for the Compressor/Limiter Attack time
was 10ms.
Version 2.0: The new default setting for the Compressor/Limiter Attack time
is now 35ms. All other settings remain the same.
3 - 1 9