Using The Unit With Optional Accessories; Maintenance - Panasonic SL-SX469V Operating Instructions Manual

Anti-Shock Function
The letters such as A in the various illustrations refer to the descriptions in the "Location of Controls" section (See page 4.) .
The anti-shock function works by reading audio data
and storing it in memory (up to 40 seconds worth). The
unit then fills in interruptions caused by bumps and vi-
brations with data from the memory. This unit also in-
corporates a powerful anti-shock mechanism that
prevents skipping caused when play speed is changed
by swinging of the unit.
Press during play or stop mode.
A.SHOCK
E
FM RECEPT
%CITY/NOR
The following indicator appears on the display.
D
A.SHOCK
Using the Unit with Optional
Accessories
Using the unit with an audio system
Using the stereo connection cable (not included), you
can listen to CDs on your audio system.
≥Turn off the amplifier power and connect the cable.
≥Do not connect the cable to the PHONO jacks on the
amplifier.
≥Obtain the optional connecting cable if the amplifier
comes with mini-phone jacks.
≥Adjust the volume on the amplifier.
OUT jack
Side panel of the unit
Stereo phono cable
(not included)
(White)
(Red)
5
When bumps continue repeatedly
The following indicator appears on the display and
sound is interrupted.
To cancel the anti-shock function
Press [A.SHOCK, FM RECEPT, % CITY/NOR] again.
Using the unit with a car audio
system
Items to be purchased
For connection to the car audio system:
Car stereo cassette adaptor (SH-CDM10A)
Connect the car stereo cassette adaptor to the
unit's headphone jack. (When doing this, keep
the unit's VOLUME at a setting between 4 and
6.)
For securing the unit and connecting the
power supply:
≥Car adaptor (SH-CDC9)
≥Car mounting kit (SH-CDF7)
≥Car mounting arm, Car insulator
Note!
Amplifier
≥It may not be possible to use the unit with some types
L
of car stereo owing to restrictions imposed by the con-
To CD or AUX
struction of the car stereo cassette adaptor.
terminals
R
≥Move the unit away from the car adaptor if noise inter-
feres with the radio.
For further details, refer to the instructions of the part
concerned.
D
SORRY
A.SHOCK
Note!
≥The anti-shock setting can be changed during play,
but this may cause a slight interruption in the sound
because the disc's rotational speed changes.
≥During anti-shock operation, the disc rotates at a high-
er rate than usual to collect extra audio data. This
could result in a slight increase in disc rotation noise.
Using the unit with an audio system
The anti-shock function uses digital signal compression
technology. It is recommended that the anti-shock func-
tion be canceled if the unit is connected to a home
audio system.

Maintenance

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth
dipped in a soap-and-water solution or a weak deter-
gent solution.
≥Never use alcohol, paint thinner or benzine to clean
this unit.
≥Before using chemically treated cloth, read the instruc-
tions that came with the cloth carefully.
Maintaining the lens
Open the lid and clean the lens as shown in the figure.
Use a cotton swab to gently wipe off any finger-prints.
Recommended product: Lens cleaner kit (SZZP1038C)
Air blower for
camera lens
Lens
Lens
RQT5160