Panasonic TH-42PZ800U Service Manual page 23

4. Remove the spacers and spacer rings (×6
7.20. Remove
(Squawker)
1. Remove the Cabinet assy. (See section 7.21.)
2. Disconnect the relay connectors.
3. Remove the screws (×2
4. Remove the Speaker (Squawker/L, Squawker/R).
).
the Speaker
each).
7.21. Remove the GL-Board
1. Remove the Cabinet assy. (See section 7.19.)
2. Remove the Speaker (Squawker /R). (See section 7.20.)
3. Remove the screws (×3
shield R.
4. Disconnect the connector (GL02).
5. Remove the screws (×2
7.22. Remove the K-Board and S-
Board
1. Remove the Cabinet assy. (See section 7.19.)
2. Remove the Speaker (Squawker /L). (See section 7.20.)
3. Remove the screws (×3
tom shield L and the S-Board shield plate.
4. Remove the screws (×2
5. Disconnect the connector (K1) and remove the K-Board.
23
) and remove the Bottom
) and remove the GL-Board.
,×1 ) and remove the Bot-
).