Bosch HBLP45 Use And Care Manual page 27

• Make sure the appliance and lights are cool and
power to the appliance has been turned off
before replacing the light bulb(s). Failure to do
so could result in electrical shock or burns.
• The lenses must be in place when using the
appliance.
• The lenses serve to protect the light bulb from
breaking.
• The lenses are made of glass. Handle carefully
to avoid breaking. Broken glass could cause an
injury.
• Light socket is live when door is open.
Bulb specifications:
Bulb Description
120 volt, 25 watt, halogen bulb, G9
base
Replacing the halogen bulb on the oven sidewall:
Tools Required
Narrow flat blade
screwdriver (blade tip
width 1/5" (5mm) or less
to fit in slot)
Flashlight (to see socket
holes to plug in bulb
prongs)
1. Turn off power to the oven at the main power supply
(fuse box or breaker box).
2. Remove oven racks if necessary to provide access to
Bulb Image
the bulb housing.
3. Optional: remove oven door to provide easier access
and visibility.
(
4. Insert the tip of a
narrow flat blade
screwdriver between
the metal clips at
about a 40° angle.
Hint: The screwdriver
blade must be able to
pass between the
metal clips to reach
the inner catch.
(A) Push the
screwdriver blade
inward to disengage
the catch from the
slot in the light
housing.
Support the glass
lens cover to prevent
it from falling.
(B) Gently pry the
lens off by moving the
screwdriver handle
away from the oven
wall. The lens should
detach easily. Do not
attempt to force it.
English 24