2. Connect the Scaler tooling board and VSD241via HDMI cable
3. Connect the Scaler tooling board and NB via USB (Type A to Type B) cable
4. Install Mstar USB Debug Tool
(Please process this step for twice for two Mstar USB Debug Tool)
Mstar USB Debug Tool
‐> Update Driver Software
‐> Browse
‐> Let me pick a list of device drivers on my computer
‐> Show All Devices
‐> Have Disk
‐> Browse
‐> \Mstar\Cdm20808 ‐> OK
‐> Next
‐> Install
‐> Close
ViewSonic Corporation
115
Confidential - Do Not Copy
VSD241/SD-A245/CDS245