Pc With Wi-Fi Adapter - D-Link DAP-1150 Quick Installation Manual

DAP-1150
3. In the Local Area Connection Properties window, on the General
tab, in the This connection uses the following items section, select
the Internet Protocol (TCP/IP) line. Click the Properties button.
4. Select the Obtain an IP address automatically radio button. Click
the OK button.
Click the ОК button. Now your computer is configured to obtain an IP address
automatically.

PC with Wi-Fi Adapter

1. Connect the power cord to the power connector port on the back panel of
the access point, then plug the power adapter into an electrical outlet or
power strip.
2. Turn on your PC and wait until your operating system is completely
loaded.
Quick Installation Guide
4