CBC ZC-NAF27 Operating Instructions Manual page 40

19. White Balance PUSH_AUTO ON/OFF Setting
Switch the PUSH AUTO White Balance state to ON or OFF White Balance mode
according to the data of "MODE".
1) PC -> Camera
0xC5
2) Camera -> PC
0xC5 0xAA
MODE :: In case of MODE = 0x01, The PUSH AUTO White Balance state becomes to ON.
In case of MODE = 0x00, The PUSH AUTO White Balance state becomes to OFF.
Otherwise, The PUSH AUTO White Balance state is not changed.
Caution :: This mode is not saved when the power of a camera turns OFF/ON.
Default mode is "OFF" mode.
20. SHARPNESS Data Setting
Set the sharpness level of the camera according to the data of "sharpness".
1) PC -> Camera
0xC5
2) Camera -> PC
0xC5 0xAA
Sharpness ; This is a data for which adjusts a sharpness level of the camera.
Data Value range :: 00d ~ 15d
40
0xAA 0x78
0x78 MODE
0xAA 0x79
0x79 Sharpness
MODE
0x78 0xXX
Sharpness
0x79 0xXX
CAM_ID C S
0xXX 0xXX
CAM_ID C S
0xXX 0xXX
C S
C S