CBC ZC-NAF27 Operating Instructions Manual page 31

3. Camera ID Display ON/OFF control
Change the Camera ID display mode of camera according to the data "Mode".
1) PC -> Camera
0xC5
2) Camera -> PC
0xC5 0xAA
mode :: This is a data for setting the Camera ID Display Mode.
In case of Mode = 0x01, the Camera ID number is displayed on the screen (Display ON mode).
In case of Mode = 0x00, the Camera ID number is not displayed on the screen (Display OFF mode).
Otherwise, The Camera ID Display mode is not changed.
Caution:If the Camera ID is 0x00, then the Camera ID is displayed on the screen at any time.
4. Camera Restart
; Restart the Camera.
1) PC -> Camera
0xC5
0xC5 0x4F
0xAA 0x96
0x96 Mode
0x4F 0x00
0x00 0x00
Mode
0x96 0xXX
0x00
0x00 0xXX
CAM_ID C·S
0xXX 0xXX
CAM_ID C·S
0xXX 0xXX
C·S
C·S
31